#1 for Low Prices & High Quality!
Phone 866-525-9288 

Fax 866-525-9289
Email

"Yes, we sell to the public!"
 

Gate Operators
Fence Wholesale


Fence Wholesale offers gate operators for residential, commercial and industrial uses.  Operators are available for swing gates, slide gates and barrier gates.

Some of the options available include: interior and exterior controls, radio controls, digital keypad entry systems, card controls, programmable card readers, telephone entry systems, vehicle loop detectors, time delay systems, photoelectric eyes, gated safety edges, intercom systems and warning devices.


Swing gate operators 
Our swing gate operators come in two basic types harmonic crank and arm style and  linear traveler style operation. All models are available with master-slave control for a pair of gates. The residential model  is offered in single button 1/2 HP 115 and 220 volt. All other models are available in all voltages and are equipped with a 3 button control station. All except model RS are adapted for additional systems and accessories.

Operators can be post or pad mounted. Crank drive requires 24" side space. Linear drive requires 60" side space for gates up to 16 feet and 80" for gates over 16 feet. Call for limited side space. Linear drive recommended on extremely large gates.

Two operators are required for double swing gates. Units are normally master-slave so both gates open from one control or system. Units can be ordered to open independently. 

WIND LOAD CAUTION
 A swing gate constructed of material that restricts the flow of air can cause severe damage to a gate operator. Wind force against the gate generates exceedingly high torque forces back through the operator. Results can be bent arms, snapped chain, damaged speed reducers, etc. OSCO operator warranties do not cover damage covered by wind. Note: Reversing Edges and photoelectric units not shown for sake of clarity.

<<<<SINGLE-SWING CRANK DRIVE

LINEAR DRIVE >>>>

<<<<DOUBLE-SWING CRANK DRIVE

DOUBLE-SWING LINEAR DRIVE>>>>

Note: Reversing Edges and photoelectric units not shown for sake of clarity.


Slide gate operators
We
offer three types in several basic models, the residential, the industrial, and the heavy duty industrial. All commercial models include a 3 button control station and are adapted for all systems and accessories. 

Click on Images to see detail

Cantilever Single Slide
 slgapp1.gif (24196 bytes)
(Right hand shown) Operator can be post or pad mounted, package includes sufficient chain to span gate. Be sure gate opening length is provided.
 
Cantilever Double Slideslgapp2.gif (21440 bytes) 
Two operators are required. Units can be ordered master/slave so both gates operate from one control or system. Units can be ordered to operate independently with separate controls.
Overhead Single Slide
slgapp3.gif (20500 bytes)
(Right hand shown) Overhead gate installation requires an extension of gate beyond operator. Standard slide gate operator used. Operators are also available for vertical gates.
 

 

 


Barrier gates

Our barrier gates offer provide rugged, high security entrance and exit control necessary for industrial and parking applications. From light use to continuous operating duty cycles, our barrier gates are designed to function with various configurations; several of which are shown at the bottom of this page. Arm lengths vary from 10 to 25 feet in length. All of our barrier gates can be configured for Master-Slave operation.



© Fence Wholesale all rights reserved  2001- Present

This site was designed by AWebsiteDesign.com and Harrisburg Websites